Snake Eyes Golf

SNAKE EYES 650T Ti Driver Head Bundle

Snake Eyes 650T Ti Driver Head Bundle : This 430cc driver head features a super-strong DAT16V beta titanium and a special Reactive Cup Face that promotes increased ball velocity. The Snake Eyes 650T Ti Driver Head Bundle kit includes: Snake Eyes 650T Ti driver head : RH 9.5°, 10.5°, 11.5°, or 13° Snake Eyes Series 600 wood shaft : features Proforce Tip Technology; A, R, S or X Lamkin Crossline grip : striking cosmetics and innovative design Snake Eyes Ferrule Snake Eyes 650T Driver Headcover

SNAKE EYES Python Titanium 9 Degree Driver Bundle

Snake Eyes Python Titanium Driver Bundle : Bundle Includes: Snake Eyes Python 9 driver head : Python Titanium drivers feature a 450cc jumbo-sized body with twin weights positioned in the rear of the sole to increase launch and forgiveness Snake Eyes Python wood shaft: .350 tip shaft to match new Python Titanium woods with newly developed Titanium Tip Weave (TTW) design which increases the stability and stiffness in the lower section of the shaft to combat stress caused by a large head design. Snake Eyes Winn Ai excel grip Snake Eyes Python driver hardcover: Made of simulated soft leather and elastic knit, this embroidered cover fits the Snake Eyes Python Driver Head .350 black ferrule

SNAKE EYES Quick Strike II Gamer Bundle

Snake Eyes Quick Strike II GAMER Bundle Purchased separately this set would cost $78. Save with this bundle deal! Bundle includes: Quick Strike II Utility Wood Head - Take the best selling utility wood in the clubmaking industry and make them even easier to hit. By slightly broadening the breadth of the head, and positioning the copper-tungsten sole weights more rearward in the sole, Quick Strike II heads are even more forgiving and easier to launch than the original Quick Strike. Aldila Gamer Hybrid .335 Wood Shaft - Precise and predictable, Aldila s new Gamer hybrid graphite shafts feature a unique mid-bend point, mid-launch design that eliminates the sky ball and helps better players add more touch to their games. Bend Point: Mid. Snake Eyes Velvet Grip Snake Eyes Wood Ferrule - provides taper and enhances the appearance of the club and requires little or no turning. 12.3mm X .335. Quick Strike II Head cover

SNAKE EYES Snake Eyes 650T UST V2 Bundle

Bundle includes: Snake Eyes 650T Driver Head - The sole design has been adjusted to place extra mass in the rear heel area to aid in squaring the face and creating a slight draw bias without a closed face. Snake Eyes V2 65 Wood Shaft - A balanced tip section promotes maximum energy transfer and the low torque reduces side spin for greater control. Snake Eyes Crossline Grip - Striking cosmetics and innovative design. Snake Eyes 650T Driver Headcover Wood Ferrule

SNAKE EYES Snake Eyes 655-T MW Driver Bundle Deal

Snake Eyes 655T-J Bundle : Based on the success of the original 600T and 600T-J driver heads, the 655T-J combines the DAT600C beta titanium face material with the added power of a 460cc driver design. DAT600C is 15% more elastic than other beta titanium alloys and 20% stronger than 6-4 titanium. The volume of the head is over 19% larger than the original 600T model, enlarging the effective sweet spot on the face and promoting maximum forgiveness. As with all 600 Series driver heads, the 655T-J has a patented bevel around the top shell increasing strength of the thin crown and providing a pleasing shape at address. Also, a new sole design provides structural support via a stepped heel and toe area to promote a solid, stable feel at impact. Grafalloy’s high-performance NZ-Six graphite shaft and a great-feeling Snake Eyes Lamkin Crossline grip complete this extremely forgiving driver. You even get a matching headcover! Bundle includes: Snake Eyes 655T-J driver head: 430cc clubhead with four weight screws Grafalloy NZ-Six wood shaft : revolutionary NZ SIX design segments the shaft into six individual zones and aligns thin, finite carbon fiber layers to optimize shaft flex within each zone Snake Eyes 650 series headcover Snake Eyes Lamkin Crossline grip

SNAKE EYES Snake Eyes Quick Strike Hybrid Bundle

Bundle includes: Snake Eyes Quick Strike Tour Utility Head - Features less offset than many hybrids aimed at high-handicap players to allow the avid golfer to better work the ball. UST IROD Hybrid Fairway Wood Shaft - Specifically designed to control ball dispersion from the fairway and for those difficult approach shots to the green. Snake Eyes Velvet Grip Snake Eyes Quick Strike Tour Cover Wood Ferrule

SNAKE EYES Snake Eyes Viper TI-4 Driver Bundle

Snake Eyes Viper Ti-4 Driver Bundle : The Snake Eyes Viper Ti-4 Driver Bundle features the Snake Eyes Viper Ti-4 driver, the Grafalloy NZ-Six wood shaft, a Lamkin Crossline grip, headcover, and ferrule. Each 430cc clubhead is shipped with four weight screws that can be maneuvered about the skirt to create an array of various launch angle and flight pattern tendencies. Grafalloy s high-performance NZ-Six graphite shaft and a great-feeling Snake Eyes Lamkin Crossline grip complete this extremely forgiving driver. You even get a matching headcover! Bundle includes: Snake Eyes Viper Ti-4 driver head : four custom weight ports are located around the perimeter of this 430cc driver, allowing for true customization of ball flight Grafalloy NZ-Six wood shaft : revolutionary NZ SIX design segments the shaft into six individual zones and aligns thin, finite carbon fiber layers to optimize shaft flex within each zone Snake Eyes Lamkin Crossline grip : striking cosmetics and innovative design Snake Eyes Viper driver headcover Snake Eyes logo ferrule

SNAKE EYES Viper Ti-460 Bundle

Bundle includes: Snake Eyes Viper Ti460 Driver Head - Designed for players seeking ball flight customization in a large head design. ProLaunch 65 Wood Shaft - Micro-Mesh Tip technology delivers the perfect combination of tip stability and energy transfer with high launch. Snake Eyes G8 Black/Blue Grip - Advanced Integration Technology (AIT) precisely positions the optimum levels of tackiness and feel where they are needed most. Snake Eyes Viper Driver Cover Snake Eyes Ferrule

SNAKE EYES Viper Ti-460 Pro Laungh Bundle Deal

Bundle includes: Snake Eyes Viper Ti460 Driver Head - Designed for players seeking ball flight customization in a large head design. ProLaunch 65 Wood Shaft - Micro-Mesh Tip technology delivers the perfect combination of tip stability and energy transfer with high launch. Snake Eyes Multi-Compound Cord Grip - Features cord in the top portion for all weather control and a soft, blue lower portion to provide optimal comfort. Snake Eyes Viper Driver Cover Snake Eyes Ferrule

SNAKE EYES 600T Fairway Metal Wood Head

New 600T fairway woods offer a super hot feel thanks to a newly formulated MAS900H cold rolled maraging steel face that has a 50% stronger yield strength than standard 17-4 steel. This results in higher ball velocity while the medium low profile face allows for controlled trajectory.

SNAKE EYES 600T Ti Driver Head RH [CLUBHEAD ONLY]

Snake Eyes 600T Titanium Driver Heads Snake Eyes 600T driver heads feature a newly developed beta titanium, DAT600C, which is 33% stronger and 15% more elastic than 6-4 titanium. This innovative clubhead material helps reduce spin and increase carry distance. The thin 2.8mm DAT600C beta titanium face is subjected to a cold rolling procedure, followed by a heat treatment at 600° C. The result is a design that features a slightly softer, yet hotter feel at impact than one generated by other titanium alloy designs. The full pear shape design with a beveled topline around the perimeter of the topshell gives you a clear view of the ball at address. Several loft options, ranging from 8.5° to 13°, assist clubmakers in finding the best launch angle.

SNAKE EYES 600T-C 420CC Driver Head

--> The new 600T-C driver heads combine art and modern engineering into functional beauty. The metal crown has been replaced mostly with a super lightweight carbon fiber material permitting greater, more efficient weight distribution to other areas of the clubhead design. The needless weight that is trimmed out of the top shell is repositioned low and rearward in the design. This provides the design with added forgiveness and enhanced dynamic loft at impact. Styled after the immensely popular 600T driver, the 600T-C offers a higher moment of inertia from its larger 420cc construction. This additional size and higher moment of inertia provide the design with even greater forgiveness capabilities mirror-polished sole and skirt accent strip, bead-blasted heel, toe and sole sections, brushed titanium face and a rich, metallic-black paint on the top shell. However, the 600T-C allows the carbon weave pattern to show through top paint and gently fade into the black paint to generate a high-tech look that s all its own.

SNAKE EYES 650T Driver Head

Snake Eyes 650T Driver Heads The evolution of the best-selling 600T series continues with the new 650T driver heads. The face is a newly developed beta titanium alloy from Japan named DAT16V (a variation of the DAT600C). DAT16V contains 16% vanadium compared to 6AL-4V titanium which contains 4% vanadium. Vanadium is known for its high-tensile strength and hardness. The secret to both DAT600C used in the 600T drivers and the DAT16V in the 650T drivers is keeping the strength properties while increasing the elasticity. This is achieved with a proprietary heat treatment which retains the strength yet provides softer feel than most other beta titanium alloys. A special Reactive Cup Face construction of the 650T may revolutionize driver design. More thickness in the lower half of the face (3.1mm) and then a slight step thinner at the upper portion of the face (2.6mm) allows the face to flex more when contacted above the center. This maximizes the C.O.R./CT and increases initial ball velocity and launch angle while decreasing backspin. This magic combination is getting rave reviews from our test panel, especially by middle and lower handicap players. Furthermore, unlike many oversized titanium drivers, the 650T is not designed with closed face angles. The sole design has been adjusted to place extra mass in the rear heel area to aid in squaring the face and creating a slight draw bias without a closed face. This top-quality design also features Golfsmith s Hosel Weight Port.

SNAKE EYES 650T Fairway Wood Head

Snake Eyes new 650T fairway woods are highlighted by a forged MAS900H ultra high-strength steel face. By forming the face in a cup face shape, the weld line is moved off the face, allowing for more consistent impact flexure and better maintains the material properties. Middle and lower handicap players rave about the tour soft, hot feel of the MAS900H face coupled with the traditional pear-shaped profile.

SNAKE EYES 653D Driver Head

Ball flight weight changing technology has taken the driver industry by storm. The Snake Eyes 653D and 653T driver heads combine a newly developed DAT16V ultra-strong beta titanium with a Reactive Cup Face (RCF) design to give an all-new choice to gaining distance and accuracy off the tee. The 653D (Distance) features a 440cc head size with a tall 60mm face height, while the 653T (Tour) driver head features a 410cc head size with a 58mm face height. Both drivers feature the Reactive Cup Face, which is engineered with a thicker dimension on the lower half of the face with a slight step to a thinner dimension on the top portion. This unique design feature allows a large contact area above the middle of the face and raises ball velocity without increasing spin rate for more potential distance. Both driver heads house three weight screw ports to allow ball flight customization based on the player’s needs. The 653D comes standard with an 8-gram weight in the rear and two 2-gram weights in the heel and toe skirt area. The 653T comes standard with a 10-gram weight installed in the rear center and two 2-gram weights positioned in the heel and toe back skirt areas. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES 653T Driver Head

Ball flight weight changing technology has taken the driver industry by storm. The Snake Eyes 653T and 653D driver heads combine a newly developed DAT16V ultra-strong beta titanium with a Reactive Cup Face (RCF) design to give an all-new choice to gaining distance and accuracy off the tee. The 653T (Tour) driver head features a 410cc head size with a 58mm face height, while the 653D (Distance) features a 440cc head size with a tall 60mm face height. Both drivers feature the Reactive Cup Face, which is engineered with a thicker dimension on the lower half of the face with a slight step to a thinner dimension on the top portion. This unique design feature allows a large contact area above the middle of the face and raises ball velocity without increasing spin rate for more potential distance. Both driver heads house three weight screw ports to allow ball flight customization based on the player’s needs. The 653T comes standard with a 10-gram weight installed in the rear center and two 2-gram weights positioned in the heel and toe back skirt areas. The 653D comes standard with an 8-gram weight in the rear and two 2-gram weights in the heel and toe skirt area. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES 653T Fairway Wood Head

This adjustable weighting model, with its clean, pear-shaped head and soft edges, is designed for middle to lower handicap players who prefer looking for playability for a variety of turf conditions, and who also want the ability to customize flight pattern to fit their individual needs. Face heights are medium-shallow with a 34mm 3-wood that progresses to 32mm in the 7-wood head. This allows you to get the ball up on a tight fairway lie, yet not fear catching the ball too high on the head from the rough.

SNAKE EYES Compressor 450 Driver Head

The Fire Forged Compressor 450 uses the same advanced crown-locking technology as the original model to deliver superb performance but takes advantage of refined casting techniques to create a larger, more forgiving driver head. The result is a driver that is even more forgiving and more responsive at impact. Fire Forged Compressor 450 drivers also utilize a plasma welding technique to secure the 10-2-3 beta titanium face to the 6-4 titanium body. The plasma technique yields a much finer welding bead, leaving more of the face area to perform as it was designed to.

SNAKE EYES Compressor Fairway Wood Head

Fire Forged Compressor fairway woods incorporate a patented technology that helps stabilize the shell of the body and restricts any flexure in the clubhead so the face provides a very responsive feel at impact. At impact, all metal woods experience a bowing effect on the crown, caused by the compression of the ball upon the face. The crown bows upwards as a result of impact energy. The Compressor internal stabilizing structure resists flexure in the crown and sole, and redirects the impact energy back to the ball. 12,500 torque pounds lock the Compressor device into a state of suspension to restrict all body bowing and firm up its support function to the face. This restricts all impact flexure to the face which generates increased ball velocity over conventional driver architecture. Fire Forged Compressor fairway woods are now available to complete the wood set and provide a consistent look and feel from the driver through the No. 7 wood. The fairway woods also feature the patented shell-stabilizing technology that forces more energy to the face of the clubhead for increased ball velocity.

SNAKE EYES Compressor II Fairway Wood Heads

The Fire Forged Compressor 17-4 stainless steel fairway woods feature crown-locking technology with a hot Carpenter Custom 455 face to promote explosive shots from the fairway.

SNAKE EYES Compressor Ti Driver Head

Compressor Technology for More Power New Fire Forged Compressor drivers incorporate a patented technology that helps stabilize the shell of the body and restricts any flexure in the clubhead to the face providing a very responsive impact. At impact, all drivers experience a bowing effect on the crown, caused by the compression of the ball upon the face. The crown bows upward as a result of impact energy. The Compressor s internal stabilizing structure resists flexure in the crown and sole, and redirects the impact energy back to the ball. 12,500 torque pounds lock the compressor device into a state of suspension to restrict all body bowing and to firm up its support function to the face. This restricts all impact flexure to the face, which generates increased ball velocity over conventional driver architecture. Lightweight Titanium Construction Yields 400cc Driver The Fire Forged Compressor body is constructed of 6-4 titanium welded to an ultra-thin 10-2-3 beta titanium face. The internal compressor device is precision-milled titanium for lightweight and strong support. This patented compressor technology is protected under U.S. Patent No. 09/854322. Fire Forged Compressor drivers are USGA conforming.

SNAKE EYES Python Offset Steel Fairway Wood Head

Snake Eyes Python Offset Steel Fairway Heads Want high-flying, pose-worthy fairway shots? Try the offset. Like the popular Snake Eyes Python Ti Offset driver, these stainless steel fairway wood heads are designed with an offset hosel, allowing players an extra split second to adjust their hands and square the club at impact. It s the ideal fairway wood head for players to want to reduce pushes or slices. The new Python Steel offset fairway woods feature the same pancake body style as the popular Python steel fairways, giving a low center of gravity for higher ball flight. Due to the offset hosel design, these models do not feature Golfsmith s Hosel Weight Port system.

SNAKE EYES Python Offset Ti Metalwood Head

The successful 450cc Python Titanium driver is now available in an offset design. Offset sets the face back from the shaft allowing the hands an extra split second to square at impact reducing pushes and slices. This design also positions the CG of the head farther back in relation to the shaft and increases trajectory. The new offset version features the same premium DAT600C beta titanium face as other Python drivers, which is 30% stronger than 6-4 titanium and 15% more elastic than other beta titanium alloys. The deep-face design enlarges the effective hitting area, while the twin permanent brass sole weights further enhance the CG and raise the MOI to reduce twisting on off-center impacts. (Does not feature the Golfsmith hosel weight port system due to the offset hosel design.)

SNAKE EYES Python Powerlink Ti-Comp Driver Head

Three materials are combined to make one powerful design: titanium face, sole and skirt; carbon composite crown; and 20-gram steel rear mass backweight. Titanium gives the size and sound preferred by most golfers and the carbon composite crown (65% lighter than titanium) allows for the heavy steel weight to raise the moment of inertia. The composition of the carbon fiber crown is strengthened by nanotube fibers to increase crown integrity without increasing weight. An all-titanium driver simply will not allow for the weight distribution in the Python Power Link. By placing the mass of steel in the rear portion of the head, the dynamic inertia is increased, providing more stability at impact to increase the potential for even longer drives.

SNAKE EYES Python Stainless Fairway Metal Wood Head

Python Steel fairway woods feature the same Pancake body style as the titanium fairways. Likewise, the mid-low profile keeps the center of gravity low while the large brass plugs push more weight towards the back of the design raising the MOI (Moment of Inertia) for an extremely forgiving fairway wood. Both launch monitor and player testing have indicated that this model is easy to get airborne yet produces a penetrating flight that carries seemingly forever. Hosels are heat treated and feature long polished sections to allow for custom bending for both lie and face angle with professional metal wood bending equipment. Heads are finished with a deep black with green metallic paint creating a rich look. Snake Eyes logo on crown provides an alignment aid at address.

SNAKE EYES Python TI Fairway Wood Head

--> Python Titanium fairway wood heads also have the premium DAT600C face material in a mid-low profile face design. The pancake body design allows the ball to get easily airborne off the fairway while still providing a penetrating flight. Large rear-sole permanent weights position the CG (Center of Gravity) low and deep promote a higher MOI than traditional fairways. .350 hosel bore for increased stability.

SNAKE EYES Python TI Metal Wood Head

--> Python Titanium drivers feature a 450cc jumbo-sized body with twin weights positioned in the rear of the sole to increase launch and forgiveness. The full-face shape provides a large effective hitting area while adding confidence at address. The rear-sole permanent weights combined with the full body shape raise the MOI (Moment of Inertia) providing better stability at impact. Python Titanium driver heads feature the same DAT600C beta titanium face material as the most popular Snake Eyes driver series of 2004 (600T). DAT600C is 15% more elastic than most beta titanium alloys combining super strength without a harsh feel. .350 hosel bore for increased stability.

SNAKE EYES Quick Strike Fairway Wood Head

--> Quick Strike utility woods - the best selling fairway wood head line in Golfsmith history - is well known for its excellent control. Yet some players still want the trajectory benefits of a wider fairway wood. For them, Snake Eyes now presents the Quick Strike Fairway. Quick Strike Fairway wood heads feature much of the same technology as the Quick Strike II utility wood heads with a slight offset to help prevent pushing or slicing and heel-toe tungsten weights in the rear sole to stabilize the head and provide high trajectory. Also, the rear skirt walls are thicker than standard fairway woods to further enhance trajectory and forgiveness. The hosel is designed to allow custom bending for lie angle and face angle for total customization. Recommended Playing Lengths: Head No. Graphite Steel 3 42.5 41.5 5 42 41 7 41.5 40.5 9 41 40 Note: Snake Eyes components are currently available only in North America, the UK and Europe. Snake Eyes components to the UK are not available online or from the United States (contact Golfsmith Europe at 44-1480-30880).

SNAKE EYES SE Viper Ti-Steel Fairway Wood Heads

Snake Eyes Viper Ti-Steel Fwy Wd Head Viper fairway wood heads have gone through a dramatic upgrade to produce a hot, powerful flight from a high-strength steel alloy manufactured by Carpenter Steel named Custom 455(TM). Custom 455 is over 50% stronger than commonly used 17-4 stainless steel. The 2.1mm thin face is crafted separately from the body, then welded around the perimeter of the face to raise the C.O.R. (USGA conforming) and deliver a hot feel and trajectory. Face heights are medium height to play from both the fairway and rough which allows for more spring-like effect than shallow-faced designs. The crystal mirror-polished sole with glass bead blasted accents finished with a deep metallic blue head paint make this Viper Ti-Steel look as good as it performs.

SNAKE EYES Snake Eyes 655 TJ Driver Head

Snake Eyes 655T-J Driver Head : Based on the success of the original 600T and 600T-J driver heads, the Snake Eyes 655T-J Driver Head combines the DAT600C beta titanium face material with the added power of a 460cc driver design. DAT600C is 15% more elastic than other beta titanium alloys and 20% stronger than 6-4 titanium. The volume of the head is over 19% larger than the original 600T model, enlarging the effective sweet spot on the face and promoting maximum forgiveness. As with all 600 Series driver heads, the 655T-J has a patented bevel around the top shell increasing strength of the thin crown and providing a pleasing shape at address. Also, a new sole design provides structural support via a stepped heel and toe area to promote a solid, stable feel at impact.

SNAKE EYES Viper Ti-4 Driver Head

--> Customize trajectory and ball flight with this weight-adjusted driver! Four custom weight ports are located around the perimeter of this 430cc driver, allowing for true customization of ball flight. The driver comes standard with two eight-gram insert screws positioned in the center back skirt area for high launch. Two light screws (2 grams each) are positioned toward the front heel-toe areas of the skirt. The screws can be changed into six different patterns to change flight. Viper Ti-4 driver heads feature the latest in manufacturing technology with plasma-welded face construction. Plasma welding provides a more precise weld bead around the perimeter of the face (50% less than TIG welding), while also keeping the properties of the face material since less heat is focused on a smaller portion of the face. What Clubmakers Are Saying... This might be the best product Golfsmith has ever produced. I built a club with the stock shaft, the 11.5 loft head, and a Winn RF grip; the club was cut to 43.5 inches and swing-weighted to D2 using a 9 gram weight in the hosel port. I configured the screws in the slight draw position and this club just plain outperforms all pro-line drivers I have ever owned. I hit high long draws on about 80% of my shots with this club. My mis-hits are high straight drives. It is the most solid feeling and best sounding driver head ever. Super product! -Steve, Fredericksburg, VA Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two tungsten 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES Viper Ti-4 Fairway Wood Head

Adjustable weighting technology is not just for drivers anymore. The popular Viper Ti-4 driver heads now have matching fairway wood heads that also offer the ultimate in customized weight distribution. Like the driver model, Viper Ti-4 fairway wood heads are constructed of quality 6-4 titanium and feature four custom weight ports that are positioned around the perimeter of the clubhead. Each fairway wood head is shipped with four screws (two 2-gram aluminum screws and two 8-grams copper screws) that can be maneuvered about the skirt to create any array of various launch angle and flight pattern tendencies. 5-gram steel screws are also available to further fine-tune flight patterns on shots from the fairway. Extensive robot testing by Golfsmith s R&D team has shown that weights placed on the extreme perimeter skirt of a clubhead have a greater influence on changing ball flight than weights that are placed on the sole of a clubhead. More testing is needed to reveal all of the benefits of this innovative technology but one thing is certain - adjustable weighting offers clubmakers the ability to truly customize ball flight patterns for their customers. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES Viper Ti-460 Driver Head

The Viper power you expect with the weighting options you want. Designed for players seeking ball flight customization in a large head design, the Viper Ti-460 features three weight ports around the perimeter of the head. Each head comes with an 8-gram screw weight in the rear port and two 2-gram weights in the heel and toe. Research shows that placing the weights around the extreme perimeter of the head maximizes the effects the weights have on ball flight. The 460cc volume size is achieved through advanced casting techniques, allowing for an ultra-thin crown combined with a plasma welded face. This allows weight to be concentrated in the weight ports. Plasma welding allows for a 50% reduction in weld material, freeing up valuable mass to move toward the rear of the head to optimize launch angles. Wrench included. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two tungsten 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES Viper Tour Steel Fairway Wood Head

The Viper power you expect with the weighting options you want. Designed for players seeking ball flight customization in a large head design, the Viper Ti-460 features three weight ports around the perimeter of the head. Each head comes with a 10-gram screw weight in the rear port and two 2-gram weights in the heel and toe. Research shows that placing the weights around the extreme perimeter of the head maximizes the effects the weights have on ball flight. The high-performance fairway wood heads feature a super-strong Carpenter Custom 455 face that is plasma welded to the 17-4 stainless steel body. This combination yields a thin 2.1mm face design that promotes incredible feel. Like the Ti-460 driver head , the weights in the three ports can easily be removed and changed based on the player s flight preference. Wrench included. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two tungsten 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES 600 XC Iron Head

--> Premium Forged Cavity Irons for All Players Finally a clean, forged cavity back made in a size that all handicap levels can play. Designed to be the big brother to the 600C irons, 600XC irons offer larger head sizes, deeper cavities and slightly thicker topline. The face thickness is 30% thinner in the top portion of the cavity than most irons made possible by a newly developed 6-step forging process. The thinner face allows for a lower center of gravity (CG) and increased cavity depth in the lower portion of the iron. 600XC irons are true billet forged from the same S45C carbon steel delivering a soft feel of a forged iron while giving the forgiveness most players need.

SNAKE EYES 600B Forged Iron Heads

Snake Eyes 600B Forged Iron Head Snake Eyes 600B iron heads are precision forged from billets of S45C carbon steel to provide optimal feel for a clean muscle back design. A new 5 step precision forging process is an improvement over the traditonal 2 or 3 step forging process. The new 5 step process produces more accurate raw forgings, compacts the metal tighter for the elimination of voids and allows for less grinding and polishing to give better consistency from head to head. The 600B forged irons give a clean, classic set up at address. The beveled tour trailing edge gives supreme playability from a variety of turf conditions. 600B iron heads can be combined with the 600C (#SE2661) set at any point. Many players will choose to play the long and middle irons from the 600C set and then use the short irons from the 600B set. The head sizes, offsets, weights and topline appearance all match up well with one another no matter where the sets are combined. Snake Eyes 600B iron heads are the ultimate in looks, feel and playability for players who prefer a clean, quality no frills traditonal set of irons. Scorelines and artwork are CNC milled for accuracy.

SNAKE EYES 600C Forged Iron Head

Snake Eyes 600C Forged Iron Head Snake Eyes 600C iron heads are precision forged from billets of S45C carbon steel to provide optimal feel with supreme accuracy. A new 5 step precision forging process is an improvement over the traditonal 2 or 3 step forging process. The new 5 step process produces more accurate raw forgings, compacts the metal tighter for the elimination of voids and allows for less grinding and polishing to give better consistency from head to head. The 600C forged cavity back irons set up much like a blade at address but allow for better shots on off-center hits. 600C irons are designed to be matched up with the 600B set. Players can choose to place the full set of 600C irons or they can use the long and middle irons from the 600C and short irons from the 600B. The head sizes, offsets, weights and topline appearance all match up no matter where the player chooses to combine the 600C with the 600B (#se2660). Snake Eyes 600C iron heads are the ultimate in looks, feel and playability for players who prefer a clean, quality no frills set of irons. Scorelines and artwork are CNC milled for accuracy.

SNAKE EYES Fire Forged 2 Iron Heads

Snake Eyes Fire Forged 2 irons take the original Fire Forged iron one step further by adding a lower center of gravity. Through a 3-material design, performance is enhanced for the ultimate in game improvement. The Carpenter Custom 455 high-strength steel face is over 30% thinner (2.4mm) and 50% stronger than 17-4 steel used in many popular irons. An upgrade from the previous model, the addition of up to 54 grams of tungsten in a sole weight lowers the center of gravity, increasing launch and solid feel. In addition, a deep undercut cavity, coupled with the special eyes weight pad behind the face, pulls the center of gravity low and deep. This positions the true center of gavity behind the face, further raising the forgiveness.

SNAKE EYES Fire Forged HS300 Iron Head

This new Fire Forged model is designed for players who seek super forgiveness with hot ball flight. The HS300 face material has the highest strength and lowest elongation of any steel face material the Golfsmith R&D staff has ever tested. HS300 steel has three times the strength of 431 stainless steel. The thin 1.5mm face frees up valuable mass that is repositioned around the extreme perimeter and in two tungsten heel-toe weights. This model has the thinnest face and largest unsupported area of any iron offered by Golfsmith. This gives fairway wood-like forgiveness in an iron. Additionally, the chrome-plated designed provides a long-lasting rich appearance.

SNAKE EYES FMC-1 LH Iron [CLUBHEAD ONLY]

Snake Eyes FMC-1 Iron Heads FMC-1 iron heads are both investment cast and then forged, creating the soft, solid feeling players enjoy from a forged head. But at the same time, the head By investment casting the first stage of the irons, some of the costs associated with complete forgings are averted allowing the FMC-1 heads to offer the performance and feel of a forged club without the heavy price tag.

SNAKE EYES Lie-Fitting 7-Iron Head

Professionally and accurately conduct dynamic lie fittings. Specially made 7-iron head is designed with a precise 62° lie angle and 1/4 incremental sole lines. The 1/4 incremental marks guide clubmakers in determining the correct lie angle adjustment. Works best in conjunction with the Lie Test Hitting Board. For every 1/4 the center of the sole impact mark is away from the engraved center sole hash, a lie adjustment of 1° is needed (adjust more upright for impact marks towards the toe, and flat for marks toward the heel). Recommended finished club length is 37 . Available in right or left hand.

SNAKE EYES Python Iron Head

--> Wrap your hands around one of the hottest new iron head introductions in custom clubmaking history. New Snake Eyes Python irons are stunningly designed and ready to improve the games of virtually any golfer. Python irons storm onto the scene with the latest technological advancements that offer true game improvement. The massive sole widths follow a reverse progression giving the No. 3 iron the widest sole (27mm). Sole widths then become gradually narrower throughout the set, yet the wedges still maintain a relatively wide sole at 24mm. The wider soles place more weight low in the head - especially the long irons - making them easier to hit with higher launch angles. A deep undercut cavity and lower-cavity weight pad keep the center of gravity low and back from the face creating extremely solid feel at impact and remarkable forgiveness. The beveled leading edge and trailing edge resist fat shots. Python irons feature a finely detailed, laser-cut cavity medallion and are finished with a crystal mirror-polished body. A satin polished trailing sole edge and fine glass bead blasted sole, face and topline further enhance the eye-catching appeal to this exciting new iron head line.

SNAKE EYES Python O/S Iron Head

Looking for an iron to help you hit the ball with more consistency? The new Snake Eyes Python O/S is it. Designed for middle-to-high handicap players, Python O/S irons feature a very deep undercut cavity design with very wide soles and extreme perimeter weighting. The result is a club that is much easier to hit squarely and features a 10 percent larger hitting area than the original Python iron head just in case. Thick topline widths (9mm) and progressive offset hosels provide added confidence at address and the mirror-polished body with satin-scratch trim and rich cavity medallion create a very appealing overall appearance. The wide soles keep the weight low for mid-to-high trajectory and feature beveled trailing edges so that they play well from either fairway or rough.

SNAKE EYES Python Plus Iron Head

Snake Eyes Python Plus Iron Heads Mid-size design provides maximum forgiveness. Deep, undercut cavity provides solid feel at impact. Unique progressive sole design promotes accuracy. It s time to take your iron play to a higher level. The next generation of the best-selling Python iron family is here. Like the original Python iron, the new Python Plus features a deep undercut cavity, wide sole widths and a mid-oversize body with full perimeter weighting. Within the undercut back cavity, a special urethane insert gives a powerful, solid feel at impact. The CAD designed vibration dampening system incorporates a two-part energy-absorbing insert that decreases negative vibrations resulting from off-center hits. These innovative iron heads also feature a reverse progressive sole design with the long irons having the widest sole widths progressing to medium-wide sole widths in the middle and short irons. This places weight low where it is needed most in the longer clubs, resulting in high-flying, soft-landing approach shots.

SNAKE EYES Quick Strike II Iron Head

Designed for players who want a true game-improvement set of irons - that s because the Quick Strike II irons take the hybrid progressive set to the next level. The 3- and 4-irons are precision-cast from 17-4 stainless steel and incorporate offset with hollow metal-wood type construction and copper-tungsten sole weights. Calling these clubs easy-to-hit long irons is an understatement. The 5-iron is a transition club cast from 431 stainless steel that features twin copper-tungsten sole weights with an undercut hollow-core design. Numbers. 6, 7, 8 and 9-iron heads feature undercut cavities with perimeter weighting making a very forgiving, controllable and solid-feeling design in 431 stainless steel. The PW, AW, SW and LW heads are clean cavity back heads, precision cast from soft 304 stainless steel to give a soft feel with the scoring irons.

SNAKE EYES Viper Ti-4 Iron Head

The future of iron head design is here! Two removable 2-gram weight screws in the lower heel and toe areas, a hot-feeling titanium face and a deep undercut cavity combine to provide maximum distance and fantastic feel. Placing a heavier weight in the toe port can help promote solid feel and improved stabilization at impact for players who consistently make contact out toward the toe of the clubhead face. The Viper Ti-4 iron will accept the 8-gram tungsten , 5-gram steel and 2-gram aluminum weights. The 8-gram copper, 10-gram steel and 12-gram steel weights are too long for the heel port in the Viper Ti-4 iron.

SNAKE EYES Viper Ti-Steel Iron Head

--> Massive size, massive improvement. New Viper TiSteel iron heads bring dramatic change in weight distribution through an innovative new construction method yielding an iron that is easy for any player to hit solid. The oversize body features a hollow lower body construction cast from 431 stainless steel. This allows for wider soles, a more rearward center of gravity and increased perimeter weighting. Like the popular Viper TiSteel fairway woods, the face is constructed of Carpenter Custom 455 steel. The 455 face is stronger (tensile strength is 2 times that of 431 steel) and thinner (2.4mm) than traditional steel delivering a hotter feel while allowing more weight to be placed around the perimeter. The face is supported around the perimeter only allowing for increased forgiveness and hotter flight made possible by the thin (1.8mm), yet deep, undercut in the back cavity. The thick topline (9mm) provides confidence at address, but it s interior sculptured design removes weight from the top, which is repositioned lower in the head. Progressive offset and generous bounce work together to make the Viper TiSteel irons easy to hit from a variety of turf conditions.

SNAKE EYES Viper Tour Iron Head

Viper Tour Iron Head

SNAKE EYES 600 Series Putter Head

Snake Eyes 600P Putter Head Snake Eyes 600P putters combine quality, beauty and function. The soft 304 steel bodies are precision milled for exact shape and consistency. Faces have a jewel milled pattern ensures consistent roll. Model II and IV are center-shafted and face-balanced. Anodized soft aluminum inserts are plated for durability yet give a very responsive feel for distance and touch. A special silver nickel electroplating combined with the mirror polished soles finish off these exquisite designs. Snake Eyes 600 series stemmed hosels will fit perfectly with our stepless steel putter shaft #2178. Recommend headcover #236793.

SNAKE EYES 653P Putter Heads

With the movement of today s golfer preferring lengths as short as 31 to as long as 37 for a standard length putter, fine-tuning the head weight has become a hot topic. After all, it s important to find the best feel to build a repeatable stroke. 653P.1 is a large, high moment of inertia design with three Snake Eyes screw weight ports in the back. 653P.2 is a mid-size mallet with three Snake Eyes screw weight ports in the back. The port channels also serve to aid in alignment. 653P.3 is an offset, face balanced long hosel design that has two weight ports - one on the heel and another on the toe. All models come with 2-gram weights. Extra Weights: Two aluminum 2g weights Two steel 5g weights Two copper 8g weights Two tungsten 8g weights Two steel 10g weights Two steel 12g weights

SNAKE EYES Python Pure Balance Model I

Turn your Lip Outs into Lip Ins! High Moment of Inertia (MOI) putters have stormed onto the PGA Tour allowing even the best players in the world to benefit from the most stable putters ever created. The new Python Pure Balance putter gives high MOI performance in perhaps the most attractive shape and design ever created for custom clubmakers. Python Pure Balance I putter heads are 100% milled from 6061-T6 aircraft-grade aluminum and feature twin heel-toe brass weights totaling 15 grams, plus a larger 20-gram rear brass weight. These weights place an extra concentration of mass in very strategic areas to raise the MOI and stabilize the putter head when struck off center. The target alignment line on top is extended longer than most previous mallet designs to enhance visibility to the target. The Python PB-1 is face-balanced when assembled with the no. 2605 double bend shaft.

SNAKE EYES Python Pure Balance Model I-C

The high-tech Snake Eyes Python Pure Balance series continues to gain in popularity as more and more golfers realize the benefits of high Moment of Inertia (MOI) putter head designs. To give clubmakers even more options, Golfsmith s R&D team introduces yet another Pure Balance model - the I-C. The I-C is similar to the unique Pure Balance I design, but weighs 40 grams more and features a center shaft location. With it s 73 degree lie angle and center shaft configuration, the Pure Balance I-C can be built to a standard length to provide a heavier-feeling putter head - a trend that is becoming popular on Tour. This versatile clubhead design can also be used to craft longer, mid-length putters. As with the rest of the Python Pure Balance putter series, each head is 100% CNC milled from a block of 6061-T6 aircraft grade aluminum. The light weight aluminum body allows for strategically placed weights in the heel, toe and back center to stabilize the putter head on the off-center shots.

SNAKE EYES Python Pure Balance Model II

--> 100% CNC milled from 6061-T6 aircraft grade aluminum, Python Pure Balance putter heads are the pinnacle of high MOI (Moment of Inertia) putter design. The Pure Balance II incorporate strategic brass cylinders in the heel and toe while the H body construction which places much of it s mass far back from the face to stabilize the putter when stuck off-center. #2605 double bend shaft is recommended face balancing.

SNAKE EYES Python Pure Balance Model III Ptr Head

--> The Pure Balance III is over 50% larger from heel to toe than the Pure Balance I. This massive head size provides supreme stability. Recommended shaft is #2605 double bend.

SNAKE EYES Python Pure Balance Model IV

The high-tech Snake Eyes Python Pure Balance series continues to expand and gain in popularity as more and more golfers exploit the benefits of high MOI putter head designs. All five models are 100% CNC milled from a 6061-T6 aircraft-grade aluminum that promotes the ultimate in playability. The new Pure Balance IV has a more traditional, longer heel-toe dimension (134mm) that promotes maximum stability and performance. The large, rear brass weight further stabilizes the head and aids in alignment.

SNAKE EYES Sight Line Putter Head

Designed for any player seeking a high MOI design who wants the ability to customize weight in order to fine-tune club feel. 6061-T6 aircraft grade 100% CNC machine milled aluminum body in three weight options - 330g, 360g or 400g. Each model features the same body design with a different brass backweight that can be changed out to raise the weight of the head. Features a unique anodized blue finish and clean white sight lines. These putters can be built shorter to standard lengths of 32-36 with our double bend putter shaft or mid-long putter lengths of 39-42 with the new mid-length double bend putter shaft . The M400 model is recommended for mid-long lengths. Also available: 170 gram brass weight 200 gram brass weight 240 gram brass weight

SNAKE EYES Sight LIne Putter Head

Sight LIne Putter Head

SNAKE EYES Strike Line OL RH Putter Head

The new Strike-Line OL putter heads are constructed from a 431 stainless body and a 306 stainless steel rod that wraps around the trailing perimeter of the head. This design concentrates weight back and out from the center of the face on a horizontal plane that is in line with the golf ball s equator. The result is remarkable stability, solid feel and smooth roll. Designed with more upright lie angles, added weight and a center shaft location, the Strike-Line OL (78° lie; 400 grams) heads are ideal for building mid-length and over-length putters. Strike-Line putters feature a full epoxy face insert that improves feel and roll. The split circle on the top of each putter head is just slightly smaller than a golf ball s diameter and offers an excellent sight line from the putter through the ball and to the hole.

SNAKE EYES Strike-Line Putter Head

The popular Strike Line series introduces two new models. Both feature 431 stainless steel bodies with finely milled faces for consistent roll. These putter heads require a double-bend shaft for face balance.

SNAKE EYES Viper Tour-1 Putter Head

This is the Snake Eyes putter series designed with the avid player in mind. Traditional shapes and classic appearances let the Viper Tour series of putters feel as much at home on Tour as they do at the local muny. Soft 304 steel provides exceptional feel. Viper Tour putters are finished in silver nickel plating to create a rich, durable finish. Available in three timeless models: Viper Tour 1 Slight offset semi-mallet with heel/toe weighting

SNAKE EYES Viper Tour-2 Putter Head

This is the Snake Eyes putter series designed with the avid player in mind. Traditional shapes and classic appearances let the Viper Tour series of putters feel as much at home on Tour as they do at the local muny. Soft 304 steel provides exceptional feel. Viper Tour putters are finished in silver nickel plating to create a rich, durable finish. Available in three timeless models: Viper Tour 1 Slight offset semi-mallet with heel/toe weighting

SNAKE EYES Viper Tour-3 Putter Head

This is the Snake Eyes putter series designed with the avid player in mind. Traditional shapes and classic appearances let the Viper Tour series of putters feel as much at home on Tour as they do at the local muny. Soft 304 steel provides exceptional feel. Viper Tour putters are finished in silver nickel plating to create a rich, durable finish. Available in three timeless models: Viper Tour 1 Slight offset semi-mallet with heel/toe weighting

SNAKE EYES 650T-H .370 Hybrid Head

The new Snake Eyes 650T-H hybrid utility heads offer golfers the trajectory of a fairway wood with the control of an iron, but in a larger, confidence-building design that many players prefer. The hollow construction, wide soles and low profiles all set the 650T-H hybrid design up to provide higher trajectory than traditional long irons of similar loft. The unique head shape moves the center of gravity low and back from the face while the construction of this hybrid further enhances ball flight and feel. The 17-4 stainless steel body houses permanent twin brass sole weights positioned in the heel and toe of the soles. The 1.8 mm-thin face plate is constructed from DAT16V - a very strong, yet elastic beta titanium from Japan. The vanadium content of DAT16V is 16%, four times that of 6AL-4V titanium. Vanadium is an important contributor to strength, while a proprietary heat treatment keeps the material elastic. Recommended Playing Lengths: Graphite Steel 17.5° 40¾ 40¼ 20° 40¼ 39¾ 22.5° 39¾ 39¼

SNAKE EYES 653T-H Hybrid Head

Tour-size design High-strength face for a hot feel Adjustable weighting for ball flight customization No hype. This is the pinnacle of customization and hybrid club performance. This ultra-playable utility club is designed for middle to lower handicap players preferring a tour-size hybrid design with a slight offset and the versatility to play from a variety of shots.This high-performance design also features innovative function in a tour hybrid size. Dual screw weight ports with 8-gram copper screws are positioned in the rear heel and toe to provide the ultimate in customization, while the taper progressive sole rails cut through higher grass without hampering performance in tighter lines or from fairway bunkers. The MAS900H ultra-high strength steel cup face delivers a tour soft, hot feel. Also features a slight offset hosel preferred by middle and lower handicap players. Recommended playing lengths: Graphite Steel 15° 41¾ 41 18° 41¼ 40½ 21° 40¾ 40 24° 40¼ 39½

SNAKE EYES Quick Strike II Approach Head

Designed for players of middle to higher handicap levels looking to improve their short game by bringing consistency to their chipping or pitching. This design is known to benefit golfers with the chipping yips. A slight offset hosel and full rounded sole allows for clean, consistent contact and lets your hands to stay set ahead of the ball while using a putting type stroke. Ideal for use from run-up shots around the green, this unique design also offers maximum playability from tall grass or fringe around the green. The increased loft and shorter playing length Quick Strike II Approach clubs offer a better choice than lower lofted fairways or hybrids in getting up and in the hole. .370 shafting bore to accept an iron shaft - recommended playing length is 36 on 39° and 37 on 35°.

SNAKE EYES Quick Strike II Utility Wood Head

Snake Eyes Quick Strike II Utility Wood Head Quick Strike II utility wood heads take the best selling utility wood in the clubmaking industry and make it even easier to hit. By slightly broadening the breadth of the head and positioning the copper-tungsten sole weights more rearward in the sole, Quick Strike II heads are even more forgiving and easier to launch than the original Quick Strike. The offset hosel is especially helpful for players who tend to push or slice the ball helping square the face at impact. Special stepped sole design cuts through turf or light rough for clean contact. The chorcoal translucent dye-coat paint gives a very rich look at address.

SNAKE EYES Quick Strike Tour Utility Head

Are you looking for an alternative to larger offset hybrids? The new Snake Eyes Quick Strike Tour utility wood heads feature less offset than many hybrids aimed at high-handicap players to allow the avid golfer to better work the ball. A cousin to the popular Quick Strike II utility wood head, the Tour s slightly smaller front-to-back breadth dimension is also ideal for players who prefer a more compact look at address. Like the Quick Strike II utility heads, Quick Strike Tour hybrids feature a modern stepped-sole design that glides through turf and light rough and still plays well off hardpan lies, or even out of fairway bunkers. Twin tungsten weights are positioned in the rear of the sole to provide added stability. Also, the .335 inside hosel diameter accepts wood shafts, which are generally lighter and more flexible than iron shafts to generate more power.

SNAKE EYES Snake Eyes Python-W Hybrid Head

Snake Eyes Python W Hybrid Heads This popular women s clubhead line now features game-improving hybrid utility clubs! 17-4 stainless steel construction with slight offset makes these much easier to get up in the air for longer-flying shots than comparable lofted irons.

SNAKE EYES PREOWNED - Forged Blade Chrome Wedge w/ steel - GOOD Condition

Hand-forged from soft S45C carbon steel under exacting temperatures. Features a pre-worn curved sole to promote solid contact from virtually any lie, assuring remarkable consistency when playing finesse shots from the fairway or around the green.

SNAKE EYES 600W Black Forged Wedge Head

Precision forged from billets of S45C carbon steel, the 600 series wedges deliver optimal feel for a clean muscle back design. Compared to the traditional 2- or 3-step forging process, the new 5-step forging procedure produces more accurate raw forgings, tightly compacts the metal to eliminate voids and significantly reduces the need to grind and polish for a better consistency from head to head. With a wider sole width than the original Snake Eyes Forged Wedge and a tour beveled sole design, the Snake Eyes 600 wedges deliver exceptional playability from the sand, the rough and the fairway. Bounce angles keep up with current trends set by PGA Tour players. For example, the 60° wedge is designed with 10° of bounce for improved play from the sand and the rough. 600WB wedges are finished with a black oxide finish that has a high-gloss oily appearance. The black oxide finish does wear off over time and surface beneath will rust, leaving a well-worn appearance that has become quite popular with Tour players. U grooves are CNC machine-milled for ultimate accuracy.

SNAKE EYES 600W Forged Wedge Heads

Snake Eyes 600W Forged Wedge Head Snake Eyes 600w iron heads are precision forged from billets of S45C carbon steel to provide optimal feel for a clean muscle back design. A new 5 step precision forging process is an improvement over the traditonal 2 or 3 step forging process. The new 5 step process produces more accurate raw forgings, compacts the metal tighter for the elimination of voids and allows for less grinding and polishing to give better consistency from head to head. 600W wedges offer wider sole widths than the Orginal Snake Eyes Forged wedge and a tour beveled sole design to enhance the playability from the sand, rough or fairway. Bounce angles are geared to be current with trends by PGA Tour players. The 60* wedge is designed with 10 degrees of bounce to allow better play from the sand and rough. U grooves are CNC machine milled for utlimate accuracy.

SNAKE EYES 650 PM Dark Forged Wedge Head

True billet forging a mainstay of the Snake Eyes wedge line for years has long been considered the best method for constructing tour-quality wedges. Today, however, Snake Eyes has discovered a new forging process that much improves the final product. Snake Eyes 650W PM Forged wedges are forged from billets of carbon steel that are formed from powdered metal (PM). This special blend of steel is 6.5 percent less dense than normal carbon steel due to its higher aluminum content, allowing for added thickness in the lower half of the wedge design. The PM carbon steel used in the 650W series wedges also features a higher copper content allowing tighter compaction of the material, more shock absorption, even softer feel and custom loft/lie adjustments of up to 3 degrees. Other low-density steels have been introduced in recent years, but they have typically been cast and much more brittle.

SNAKE EYES 650 PM Forged Wedge Head

True billet forging a mainstay of the Snake Eyes wedge line for years has long been considered the best method for constructing tour-quality wedges. Today, however, Snake Eyes has discovered a new forging process that much improves the final product. Snake Eyes 650W PM Forged wedges are forged from billets of carbon steel that are formed from powdered metal (PM). This special blend of steel is 6.5 percent less dense than normal carbon steel due to its higher aluminum content, allowing for added thickness in the lower half of the wedge design. The PM carbon steel used in the 650W series wedges also features a higher copper content allowing tighter compaction of the material, more shock absorption, even softer feel and custom loft/lie adjustments of up to 3 degrees. Other low-density steels have been introduced in recent years, but they have typically been cast and much more brittle.

SNAKE EYES 653TM Wedge Head

653TM wedge heads are manufactured by both an initial investment cast step to get the beginning shape of the wedge, and then true forging with an 800 ton forging press to compact the material and produce a soft, solid feel. The head is created from a proprietary soft steel named 400-18 LDS (Low Ductile Steel). This steel is 10% lighter by volume compared to carbon or stainless steel used in most irons and wedges. The biggest obstacle designers face in a wedge is achieving the shape, size and thickness desired while also obtaining the correct final weight. In the case of the 653TM wedge, no sacrifices are needed. The face is finely machine milled, hence the 653TM (Tour Milled) name, to ensure perfect flatness, consistent spin and exact scorelines. Each port in the back of the head can house up to 6 grams using the Golfsmith hosel weights. Larger nylon-based weights can also be ground down to fit in the ports.

SNAKE EYES Forged Wedge Head [CLUBHEAD ONLY]

Snake Eyes Forged Wedge Head Superb-quality Snake Eyes wedges offer clubmakers the opportunity to capitalize on tour-quality wedges with name-brand recognition. Forged from the highest quality S45C carbon steel under exacting temperatures and pressure of 100,000 pounds per square inch. The result is a high-performance wedge with the highly-desirable, medium-soft feel (Rockwell hardness rating of HRB85) of forged carbon steel. Snake Eyes wedges also feature the preworn sole which promotes solid contact on shots played from any lie. Bounce angles are reduced as the sole gets closer to the hosel, keeping the leading edge closer to the ground when the face is open, reducing the chance of skulled finesse shots around the green. A tungsten-carbide and diamond-powder face blasting treatment creates enhanced ball control and a diamond-like look on the face. New, improved forging process produces higher densities, less grinding and polishing, more head-to-head consistency and better maintains the clubhead shapes and profiles.

SNAKE EYES Forged Wedge Head Left Head [CLUBHEAD ONLY]

Snake Eyes Forged Wedge Head LH Superb-quality Snake Eyes wedges offer clubmakers the opportunity to capitalize on tour-quality wedges with name-brand recognition -- in two exquisite finishes: traditional chrome and new black, nickel-chrome. Forged from the highest quality S45C carbon steel under exacting temperatures and pressure of 100,000 pounds per square inch. The result is a high-performance wedge with the highly-desirable, medium-soft feel (Rockwell hardness rating of HRB85) of forged carbon steel. Snake Eyes wedges also feature the preworn sole which promotes solid contact on shots played from any lie. Bounce angles are reduced as the sole gets closer to the hosel, keeping the leading edge closer to the ground when the face is open -- reducing the chance of skulled finesse shots around the green. New Forged Black wedges are subjected to a special CAPD (Cathodic Arc Plasma Deposition) Titanium-Nitride treatment which employs a vacuum arc to create a vapor emission of the compound. Under tight controls, this process provides both added wear resistance and the exquisite dark finish. A tungsten-carbide and diamond-powder face blasting treatment creates enhanced ball control and a diamond-like look on the face. New, improved forging process produces higher densities, less grinding and polishing, more head-to-head consistency and better maintains the clubhead shapes and profiles. Black finish available in 52, 56 or 60 degrees in Men s right hand only

SNAKE EYES GBU Forged Wedge Head

Billet Forged face and hosel from S45C carbon steel give the soft feel that helped Snake Eyes wedges develop a solid reputation. Hollow core and two-piece forged construction allow the sole width to be increased dramatically to make it easier to blast shots out of bunkers. The dynamic sole bounce is magnified in the sand due to the width of the sole, yet it is easily played from the fairway or rough. Comments generated from extensive player testing have been extremely positive. Many stated that the GBU is simply the easiest-to-hit wedge they have ever used, especially when it comes to bunker shots.

SNAKE EYES Wedge

Hand-forged from soft S45C carbon steel under exacting temperatures. Features a pre-worn curved sole to promote solid contact from virtually any lie, assuring remarkable consistency when playing finesse shots from the fairway or around the green.

SNAKE EYES Fire Forged Fairway Wood Shaft

Co-designed and manufactured by UST, these wood shafts feature Proforce Tip Technology in lighter weights and moderate torque ratings. Sleek, new graphics provide a perfect match with Snake Eyes Fire Forged Compressor metal wood heads.

SNAKE EYES Fire Forged Wood Shaft

Co-designed and manufactured by UST, these wood shafts feature Proforce Tip Technology in lighter weights and moderate torque ratings. Sleek, new graphics provide a perfect match with Snake Eyes Fire Forged Compressor metal wood heads.

SNAKE EYES Fire Forged Wood Shaft

Designed specifically to enhance the performance of Snake Eyes Fire Forged driver and steel fairway wood heads. Wood shafts feature Pro Force tip technology in light weights and moderate torque ratings to provide great feel and performance for average to stronger, mid and low-handicap players.

SNAKE EYES Lady Python Wood Shaft

Titanium Tip Weave (TTW) technology adds stability yet maintains desirable flex feel.

SNAKE EYES NV 65 .350 Wood Shaft

The same great-playing shafts from Aldila that have become one of the hottest shafts on Tour as well as better amateur golfers, but with Snake Eyes marking to give them a matching appearance with Snake Eyes clubheads. Now available in .350 to fit the Python Series woods.

SNAKE EYES NV Green Wood Shaft

The envy of even the world s top professional golfers, Aldila s new NV Green series 65 wood shaft is a manufacturing marvel utilizing 20 layers of graphite fiber in its construction, has just teamed up with the hottest club head brand in custom clubmaking, Snake Eyes. The NV 65 has received early rave reviews from players of all skill levels for its performance with the new Snake Eyes 600T metal wood head family.

SNAKE EYES NV Hybrid Wood Shaft .335

Uses an exclusive Micro Laminate Technology with 20 layers of graphite fiber to yield a high-performance graphite shaft well-suited for large titanium driver heads.

SNAKE EYES Python Wood Shaft

.350 tip shaft to match new Python Titanium woods with newly developed Titanium Tip Weave (TTW) design which increases the stability and stiffness in the lower section of the shaft to combat stress caused by a large head design. Available in A, R, S flexes. Mid-Launch, mid-60 gram weight, .600 butt, torque 4.3* (A, R), 4.0* S flex.

SNAKE EYES Quick Strike Wood Shaft

Custom designed by Golfsmith to enhance the performance of the incredibly popular Quick Strike utility woods and irons. The wood shaft profile provides exceptional feel through slightly softer tips and medium torque ratings and allows the design of the clubhead to produce high, yet penetrating shot trajectory.